Brazilian Black Slate

Brazilian Slate tiles are of the highest quality, not to be confused with cheaper hand split slates which do not give the same finish!

This Black slate gives a nice contemporary feel to any modern building but can comfortably be utilized in a more traditional setting.  Brazilian slate is carefully selected and is of the highest quality.  Flat back for easy level laying.

Brazilian Black Slate

Brazilian Black Slate

Brazilian Slate

Size available:

300mm x 150mm 22 tiles per square metre
400mm x 400mm 6 tiles per square metre
600mm x 400mm 4 tiles per square metre
600mm x 600mm 2.8 tiles per square metre
900mm x 600mm 1.9 tiles per square metre
900mm x 1200mm 0.93 tiles per square metre


Available now


Sealing: The most common mistake we encounter with people using natural stone or slate is inadequate or poor sealing of the surface.  With slate we recommend to both enhance the colour of the slate and seal it from day to day grime you use slate sealant which is applied by sponging or brushing on.  We would normally recommend  that you lay the slate first, clean thoroughly before grouting then give it the first coat of sealer, then grout and seal again for a second time.  If a matt finish is the preferred option you could alternative use stain-stop as this seals the surface but does not enhance or change it’s appearance leaving it as natural as possible.  Welsh slate tends to have a more riven surface which if not sealed correctly increases the risk of ingress of dirt or whose, bleach residue in the riven surface which is very difficult to remove completely.

You should only use slate sealant on riven slate, if you have a polished slate you should use stain-stop.

If you need further advice you can email us, Tweet @tilestop or leave a comment.