Lithofin MN Stain-Stop penetrates into the surface and coats the capillaries with an extremely thin, invisible film. Oil, grease and water are not absorbed by the surface, but remain on the surface (12 to 36 hours on polished marble and limestone, up to 48 hours on granite and gneiss). During this time, oil can easily be removed without leaving stains. The effectiveness depends on the amount of product absorbed by the surface.
The appearance of the natural stone is not affected. Some stones may become slightly darker in colour. The water absorbency of the stone is greatly reduced; the water permeability is only slightly affected. The product is UV-resistant and does not yellow.
- Also for polished surfaces
- Ready for use
- For indoor and outdoor use
- No gloss
- Effective for many years
- Contains solvents
- Polished Surfaces: 12 to 25m²/litre
- Rough/honed Granite: approx. 5-7m²/litre
- Porous Sandstone: approx. 3-6 m²/litre
- Additional Information
Manufacturer Lithofin Model MST1 Material No Thickness No Size No Colour No Suitable for Walls No Suitable for Floors No Suitable for Wet Areas No Tiles per M² No